Series Manager: Ary; Ass. Manager: Marty.
Fees
Entrance fee per race is $5 for ASCC members, and $10 for non-members.
Models Allowed
Any 1/32 AllSlotCar Formula GP cars.
Body
- White kits must be painted and racing number must be added.
- Minimum body weight is 9 grams.
- Camera pod and side mirrors can be removed.
- Front spoiler and rear wing must be attached at all times. Rear wing attachment can be reinforced with glue or tape (inside of the wing – no tape is allowed on the top surface of the wing).
Chassis
- Any variation of AllSlotCar Formula GP chassis may be used: ASGP005 (Early production) or ASGP052 (Current production).
- Aftermarket metal chassis are not allowed.
- Molding flash may be removed. Light sanding of the frame is allowed in areas that meet with the body. No other alterations are permitted.
Motor Mount, Suspension and Bushings
- Any variation of AllSlotCar motor mounts may be used: ASGP006; ASGP050 and ASGP053.
- Suspension kit (ASGP011) is allowed.
- Stock brass bushings (AS012) or ball-bearings (ASGP032) are allowed. Bushings may be glued to the chassis.
Gear, Axles, Pick-up Guides and Fasteners
- Open choice.
- Axle spacers and stop collars are allowed and free choice.
Wheels and Tires
- Any variation of AllSlotCar front wheels (ASGP007 or ASGP056) and rear wheels (ASGP008 or ASGP055) may be used. Air ride system may be filled with o-rings or other suitable material.
- Original wheel insert must be installed.
- Front tires: Stock (ASGP009).
- Rear tires: NSR F1 Supergrip Tires (p/n 5220).
- Minimum tire diameter before race is 18mm.
Motor
- Stock motor (AS001).
- Motor shaft may be reduced to accommodate crown gear.
Weight
- Maximum car weight is 90 grams.
- Ballasts are free choice.
Measurements
- Group A: Maximum track (Front/Rear) is 62mm.
- Group B: Maximum track (Front/Rear) is 68mm.
Track Power
The series will be raced at 11 Volts.
General
If it is not mentioned it is not legal. These rules were written to create a fair event and not for racers to look for loopholes.